Building painting is one of the most important parts of decorating a building, and if you want to make a difference in the interior architecture of your building, it is better to paint different parts of the building. In the following, we have provided you, dear ones, with the training in building painting and the key points that you should know in this regard.
First of all, to have a beautiful and attractive painting in different parts of the building, you must first choose the right color according to the style of interior decoration and the colors used in the interior architecture of the building, then paint the walls of the building. Building painters in Sydney training gives you information on how to choose the color and how to paint the walls, and you can use these tutorials to get a satisfactory result of painting different parts of the building.
Step-by-step building painting instruction
Painting and painting the building has steps that it is better to implement them according to their priorities. Note that first of all, it is better to prepare the necessary equipment for painting the building first, then after preparing the equipment, paint it. Mix the walls.
Equipment needed for building painting
- sandpaper
- Brush
- Roller
- Paints and other tools needed
Teaching how to paint a building correctly for beginners
Note that you must first select the desired color for the living room, kitchen, and bedroom. To choose the right color for each part of the house, you can refer to the color selection section of the living room color, kitchen color, and bedroom color.
Note that if you do not have enough information to choose the right color, you will face many problems in the long run. In Australia, most people use colors such as white, gray, blue, and gray to paint the walls of their buildings. In recent years, due to the influence of housekeeping customs and culture of other countries on Australian in painting the building, colors such as pink, red, orange, yellow, turmeric, etc. are used.
Choose the right color for painting the walls
Clean the wall with the solution
After cleaning the walls, you can smooth the work surface with the help of sanding and razor blades. If the wall plaster is sheeted or inflated, you should repair the wall plaster with the help of a wide spatula or wire brush, and if necessary, smooth and smooth the surface of the wall with the help of a layer of plaster, then remove the extra pieces with the help of a spatula. Remove the surface of the wall After this step of teaching painting the building, apply the oil under the work on the surface of the walls. It also creates coherence in the paint layers on the wall.
After the oil has dried under the work, you should be able to putty the wall, which may require one or two putty hands.
Stumbling on the wall
The first stage of building painting training: how to prepare putty. Ordinary putty and oily putty are two different types of putty that ordinary putty is suitable for plastic paint walls. To make this type of putty, you must first pour some metal powder on the bed, then add some water to the powder and mix these materials well. mix.
To make oily putty, first mix melt powder, and Elif oil together, then add oil paint to the mixture of metal powder. Note that adding alif oil to oil putty is not necessary, but glossy oil should be used in making oil putty. Otherwise, the putty will wrinkle. If you want the putty to harden, you need to add more powder to the oil putty.
How to make a putty
After preparing the required putty, fill the grooves and wall defects with the help of putty, and with the help of a special knife, pull the putty from the top to the bottom on the grooves. Note that with the help of this method, you can putty small grooves.
To fill large grooves, you must first cut them and clean them of gypsum particles and paint them, then moisten the large grooves and with the help of a special knife, pull the putty on them in the direction of the large grooves. With the help of a spatula, pull on the groove several times because the putty will accumulate in the hole or groove after drying. Apply until the sanding surface is free of stains and smooth.
How to prepare putty
Sanding on the putty walls creates dust, and you should wipe the dust off the wall with a damp cloth before painting.
Putting up walls
The second stage of building painting training: lining method
In the next step of painting the building, after smoothing the putty and cleaning the putty, it is time to apply the primer, which is usually applied on the wall surface before painting. Note that a special primer color may be used for the primer color, or the same primary color may be used to apply the primer, which in both cases is called a primer. The primer color creates a good surface for the final coloring.
The color of the liner reduces the shadows caused by the overlapping of several colors of paint, and also the color of the liner creates a uniform color on the wall surface. Note that the primer should lighten until it is close to the original color.
In the next stage of building painting training, after applying the primer, it is time to wave and stain, which is done with the help of a special putty. Note that this stage is one of the main steps in painting the wall, and if Properly covered, it will withstand plenty of adverse conditions. After staining, the soft sanding should be well applied to the walls and the dust created on the walls should be cleaned with a damp cloth to prepare the surface of the walls for the second primer. Note that it is impossible to change the color type from this next step.
Painting the surface or the third hand on the wall is the final stage of teaching building painting, and after this stage, the painting of the walls is completed.
Paint the wall with a roller
The third stage of building painting training: the method of preparing paint and painting the walls
Note that at this stage of painting training made.
We need to prepare the color you want. For rooms, it is better to use plastic paint, but if your child uses the walls as a drawing book, it is better to use oil paint to paint the walls of the room. After choosing the material and type of color you want, you should prepare the color you want. To prepare the paint, you must first pour it into a separate container and lubricate it according to the instructions on the paint bucket.
Lubricate the paint
After preparing the paint, it’s time to paint the walls, and you can use a brush or roller to paint the walls. In this part of building painting training, we will teach you how to use each of these tools.
Building painting training in full
Paint the walls with a brush
Painting a building painting with a brush
When using a brush, first pull the brush hair back and forth on your fingers, this will open and close the brush bristles and remove dust particles.
Hold the brush close to the base of the handle in your hands and dip half the length of the stylus in the paint surface and gently tap the sides of the dish or paint surface with the brush. Note that when you draw the brush on the wall, the pressure applied to the brush should be such that the hair bends towards the tip of the brush, then paint the wall with uniform and steady strokes. After each use of the brush, you must thoroughly clean it with the help of special solvents. Note that a few coats of paint are needed to have a smooth color, and after each coat of paint dries, you need to smooth it out, using sandpaper (steel wool and water skin) to smooth each coat of paint.
Paint the wall with a brush
Paint the wall with a roller
Paint the wall with a roller
It is easier to paint a wall with a roller, and it is better to use high-quality rollers that are made of natural sheep wool and have a telescopic handle lever because these types of rollers absorb color better, and in addition to this color. It’s easier to deal with them. It is not possible to cover the corners of the roller wall, and in this case, the brush is more useful. Note that you can use rollers with shorter handles to paint the windows and corners and window frames. To paint the wall with the help of a roller, you have to dye the hair of the roller from the long side half or less of this amount inside the container and empty the extra colors on the roller regularly with the help of a special mesh net inside the paint container. How to paint a wall with the help of a roller should be done one after the other and evenly, and you should draw the roller on the wall from top to bottom. The direction of movement of the hands should be such that the color of the roller is applied seamlessly to the wall or ceiling. The painting should be done from the side of the window to the interior of the room, and note that you must first paint the ceiling because it is likely that the paint grains will spray on the walls.
Never move the roller one by one in a straight line because a thin initial layer is enough to paint the walls.
Paint the wall with a roller
Learning to paint on plaster walls in a nutshell
Stages of wall painting
1. Shave or gently sand the plaster
2. Apply the oil under the work properly on the plaster
3. You can work
4. Apply sandpaper after the putty has dried
5. Dusting from sanding
6. First-hand painting (lining) with the help of a good brush or roller
7. Staining the wall with the help of a special putty after the primer dries
8. Sanding with soft sanding
9. Dust collection
10. Second-hand paint
11. Touching the third-hand color (procedure color)
Building Painting
In this article, you will get acquainted with the complete and step-by-step instructions of building painting, and we hope that with the help of this educational article, you will be able to paint the roof and different walls of the building correctly and have a satisfactory result.